An Alternative Method for Anomeric Deacetylation of Per-acetylated Carbohydrates

An alternative method for anomeric deacetylation of fully acetylated carbohydrates has been developed using imidazole in methanol.     

Syntheses and Crystal Structures of Two Coordination Polymers with Aromatic Dioxide as Bridge Ligands

Two coordination polymers, namely, two-dimensional complex 1 {[Cu(μ- L)1.5(ClO4)2(H2O)].(H2O)0.5}n (L = pyrazine-1,4-dioxide) and one-dimensional complex 2 [Co(μ-L)Br2(H2O)2]n, have been synthesized with pyrazine-1,4-dioxide as bridging ligands, and their crystal structures were determined by X-ray crystallography. Crystal data for complex 1: monoclinic system, space group C2/c, with a = 23.310(3), b = 12.2338(17), c = 10.6075(15) , β = 110.487(2)°, V = 2833.6(7) 3, Z = 8, C6H9Cl2CuN3O12.5, Mr = 457.60, Dc = 2.145 g/cm3, F(000) = 1832 and μ = 1.998 mm-1; and those for 2: monoclinic system, space group C2/c, with a = 11.012(3), b = 7.483(2), c = 11.451(3) , β = 101.654(4)°, V = 924.2(4) 3, Z = 4, C4H8Br2CoN2O4, Mr = 366.87, Dc = 2.637 g/cm3, F(000) = 700 and μ = 10.487 mm-1. 1 shows a two-dimensional sheet structure on the ac plane through the coordination of μ-L bridging ligands with Cu(II) ions, while 2 displays a zigzag one-dimensional chain along the c axis via the coordination of μ-L bridging ligand with Co(II) ions. Hydrogen bonds in 1 and 2 make the sheets (or chains) connect each other to form a three-dimensional structure.     

Synthesis and Crystal Structure of a Novel Layered Lead(Ⅱ) Carboxylate-sulfonate Compound Templated by 4,4''-Bipyridine

A new lead(Ⅱ) carboxylate-sulfonate has been hydrothermally synthesized and characterized by X-ray single-crystal and elemental analyses. It crystallizes in triclinic, space group P,(1) with a=8.1573(6), b=9.4663(7), c=12.7488(9) (A), α=89.2320(10), β=80.7380(10), γ=77.9760(10)°, Z=2, V=950.10(12) (A)3, Mr=599.57, Dc=2.096 g/cm3, μ=9.032 mm-1, F(000)=572, the final R=0.0412 and wR=0.1035. It has a 1D chain structure, and the Pb(Ⅱ) is six-coordinated. Two PbO6 polyhedra are interconnected via edge-sharing into a two-core unit. Such units are further interconnected by 3-sulfonato-benzoic acids into 1D chains which are linked by hydrogen bonds into a layer structure. The 4,4'-bipyridines are located at the interlayer space and link the layers into a supramolecular structure by π-π stacking interactions.     

Synthesis, structure and magnetic properties of the S=1/2, one-dimensional antiferromagnet, Y5Re2O12

Single crystals of Y₅Re₂O₁₂ have been grown, and the crystal structure has been determined by X-ray diffraction. This compound crystallizes in space group C2/m with cell dimensions of a=12.4081(10) Å b=5.6604(5)Å, c=7.4951(6) Å, β=107.837(3)°, Z=2. The final refinement led to R1=0.0238, WR2=0.0459 for 1053 observed reflections with F>4σ(F₀). Edge-sharing ReO₆ octahedra form infinite linear [ReO₂O_4/2]_n chains along the b direction with alternating short and long Re-Re distances. Three crystallographically independent yttrium atoms surround O2 to form OY₄ tetrahedra, which share edges and corners in the ab plane to form a two-dimensional Y₅O₄ network which separates the [ReO₂O_4/2]_n magnetic chains. This compound is therefore isostructural with the series Ln₅Re₂O₁₂Ln=Gd-Lu, which have been known since 1969. The average Re oxidation state is +4.5 in the chains and a reasonable, if qualitative MO scheme results in one unpaired electron per Re dimer. Consistent with this, magnetic susceptibility data can be fitted to the one-dimensional antiferromagnetic Heisenberg model with S=1/2 and parameters J^intra/k=−89(1)K, g=2.15(4) and χ(TIP)=5(1)×10⁻⁴ emu/mol. There is no sign of long-range magnetic order down to 2 K. These results are contrasted with those for the isostructural Y₅Mo₂O₁₂.     

Enzymatic degradation of highly phenolic lignin-based polymers (lignophenols)

Enzymatic degradation of two lignin-based polymers (lignophenols), lignocatechol and lignocresol, prepared by selectively grafting catechol and p-cresol to C_α positions of lignin, respectively, were carried out in aqueous organic solvents. Both lignophenols showed high reactivity in the peroxidase-catalyzed oxidation. Structural analyses by NMR spectroscopies revealed that the degraded lignophenols contained aliphatic chain content, which might be mainly formed in the reduction of the intermediate initially generated by the aromatic ring cleavage. Lower amount of aromatic units in the lignophenols after degraded by peroxidase also indicted the cleavage of aromatic rings. Due to the substitution of phenols at C_α positions of lignin, the degraded lignophenols did not have carbonyl structure, which was abundant in the biodegradation products of native lignin. The two lignophenols were also degraded by Rhus vernicifera laccase. But the degree of degradation was lower than that of the degradation by peroxidase, which might be due to the low activity of laccase on the lignin moieties in lignophenols.     

XPS study of interactions between linear carbon chains and colloidal Au nanoparticles

1. Download : Download high-res image (158KB)
2. Download : Download full-size image

     

EDTA—Cu配合物用于还原糖的测定

首次报道了应用ＥＤＴＡ（乙二胺四乙酸二钠盐）－铜配合物（ＥＣ）测定还原糖的分光光度法，结果表明，ｐＨ４～１１时ＥＣ的最大吸收波长为７３２ｎｍ，在ＨＣＯ－３ＣＯ２－３缓冲介质中，配合物ＥＣ的吸光度与还原糖在０７７～１６１ｍｇ（六碳糖）范围内有很好的线性关系，相关系数大于０９９８，样品测定回收率在９５％～１０５％之间。该法试剂易得、性质稳定，操作方便，灵敏度较高，取样量少于５ｍＬ。     

Synthesis of saccharidic polymer colloids via free radical mini‐emulsion polymerization

Polymer colloids based on 3‐O‐methacryloyl‐1,2:5,6‐di‐O‐isopropylidene‐α‐D ‐glucofuranose (3‐MDG) and butyl acrylate (BA) were prepared via free radical mini‐emulsion polymerization. The kinetic and colloidal features of the copolymerization were investigated. The final particle size (D) of the sugar latexes is inversely proportional to the concentration of the anionic emulsifier (sodium dodecyl sulphate, SDS) and the non‐ionic one (alkyl polyglucoside, APG). It was also found that D is independent of the concentration of either the water‐soluble initiator (potassium persulfate, KPS), or the oil‐soluble initiator (2,2′‐azobisisobutyronitrile, AIBN). The rate of mini‐emulsion polymerization is lower in comparison with the conventional emulsion polymerization under the same conditions. The polymerization rate (R_p) and the total number of particles (N_p) are proportional to the 0.72th and 0.93th power of the SDS, and to the 1.40th and 2.22th of the APG concentration. Following reaction orders, 0.79/0.06 were obtained for R_p/N_p versus the concentration of KPS, and 0.22/?0.01 for AIBN, respectively. Copyright © 2004 John Wiley & Sons, Ltd.     

A new approach to 6-deoxy-D-allofuranose- and 6-deoxy-L-talofuranose derivatives from 1,2:5,6-di-O-isopropylidene α-D-glucofuranose

3-O-Acetyl-1,2-O-isopropylidene--D-allofuranose (2 b) was prepared from 1,2:5,6-di-O-isopropylidene--D-allofuranose (1 b). Treatment of2 b with triphenylphosphine-diethyl azodicarboxylate afforded regio- and stereospecifically the 5,6-epoxy--D-allo derivative (3). The other diastereomeric compound, 5,6-epoxy-1,2-O-isopropylidene--L-talofuranose (6) was also prepared stereoselectively from2 b via the intermediates5 a and5 b. The epoxy sugars3 and6 were converted with lithium aluminum hydride to the corresponding 6-deoxy-1,2-O-isopropylidene--D-allofuranose (4 a) and --L-talofuranose (7 a) derivatives. Hydrolysis of4 a and7 a afforded 6-deoxy-D-allose and 6-deoxy-L-talose, respectively. The corresponding 3,5-di-O-acetyl- (4 b and7 b) and the 3,5-O-(tetraisopropyldisiloxane-1,3-diyl) derivatives (4 c and7 c) are also described. Selective removal of the isopropylidene group and subsequent acetylation offers a convenient route to prepare sugar derivatives containing furanose ring, like8 b, as a suitable precursor for nucleoside analogs.Herrn Prof. Dr.K. Komarek mit den besten Wünschen zum 60. Geburtstag gewidmet.     

A highly sensitive method for quantification of myosin light chain phosphorylation by capillary isoelectric focusing with laser-induced fluorescence detection

Activation of myosin II by phosphorylation of the 20 kDa regulatory light chains (LC20) has been implicated in numerous contractile and motile events, e.g., smooth muscle contraction, cytokinesis, and cell migration. The ability to analyze LC20 phosphorylation in minute samples is critical to determine the importance of LC20 phosphorylation in diverse physiological processes. We have developed a method for the separation and quantification of unphosphorylated, monophosphorylated, and diphosphorylated LC20 with a detection limit of 1 pg (50 amol). LC20 is initially isolated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and transblotted to a polyvinlyidene difluoride (PVDF) membrane. The region of the membrane containing the LC20 band (identified by electrophoresis of purified LC20 in a neighboring lane) is cut out and fluorescently labeled with Alexa Fluor 488 C5 maleimide. The labeled LC20 is eluted from the membrane with detergent and subjected to capillary isoelectric focusing (CIEF) to separate unphosphorylated, mono-, and diphosphorylated LC20, which are detected and quantified by laser-induced fluorescence (LIF). A linear relationship between log(peak area) and log(LC20 amount) is observed over the range of 50 amol-150 fmol. Quantification of LC20 phosphorylation by CIEF with LIF detection was compared with three commonly used methods with much lower levels of sensitivity: urea/glycerol-PAGE with Western blotting, phosphorylation by [gamma-32P]ATP with Cerenkov counting, and phosphorylation by [gamma-32P]ATP followed by SDS-PAGE, autoradiography, and scanning densitometry. All four methods gave very similar quantitative results, the major difference being that the new method exhibits 3000-fold enhanced sensitivity. This method is therefore applicable to quantitative analysis of phosphorylation of minute quantities of LC20.